Highlight: 
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                fully automatic solder paste printer, PCB depaneling machine with warranty, YS-GSE PCB production line
                              

Weight:	900Kg	Repeat Position Accuracy:	±0.01mm
Print Accuracy:	±0.025mm	Process CT:	5min
Transport Speed:	900±40mm	Print Speed:	10~200mm/sec
Print Pressure:	0.5~10Kg	Cleaning System:	Dry, Wet Vacuum Three Modes
Machine Width:	1362mm	Maximum Board Size:	400340mm (Scalable:530340mm)
Board Thickness:	0.4~6mm	Power Source:	AC:220±10%,50/60Hz 2.2KW
Air Pressure:	4~6Kgf/cm²	Operating Temperature:	-20℃~+45℃
Working Humidity:	30%~60%

Weight:	900Kg
Repeat Position Accuracy:	±0.01mm
Print Accuracy:	±0.025mm
Process CT:	5min
Transport Speed:	900±40mm
Print Speed:	10~200mm/sec
Print Pressure:	0.5~10Kg
Cleaning System:	Dry, Wet Vacuum Three Modes
Machine Width:	1362mm
Maximum Board Size:	400340mm (Scalable:530340mm)
Board Thickness:	0.4~6mm
Power Source:	AC:220±10%,50/60Hz 2.2KW
Air Pressure:	4~6Kgf/cm²
Operating Temperature:	-20℃~+45℃
Working Humidity:	30%~60%

YS-GSE High Quality Fully Automatic Solder Paste Printer PCB Production Line

Machine Performance Specifications

Parameter	Specification
Repeat Position Accuracy	±0.01mm
Print Accuracy	±0.025mm
NCP-CT (excluding cleaning and printing)	7.5s
HCP-CT (including cleaning and printing)	19s/pcs
Process CT	5min
Transfer Line CT	3min

Substrate Processing Parameters

Parameter	Specification
Maximum board size	400340mm (Scalable: 530340mm option)
Minimum board size	50*50mm
Board thickness	0.4~6mm
Camera Mechanical range	528*340mm
Maximum board weight	3kg
Board edge clearance	2.5mm
Board height	15mm (Beyond trait items pin)
Transport speed	900±40mm

Printing Parameters

Parameter	Specification
Print Speed	10~200mm/sec
Print Pressure	0.5~10Kg
Print Mode	One/Twice
Queegee Type	Rubber/Squeegee Blade (angle 45/55/60)
Snap-off	0~20mm
Snap-Speed	0~20mm/sec
Template frame size	470370mm~737737mm (Thickness: 20-40mm)
Steel mesh positioning method	Manual positioning

Cleaning Parameters

Parameter	Specification
Cleaning System	Dry, Wet Vacuum three modes
Cleaning system	Up Drip type
Cleaning stroke	Automatic generation
Cleaning position	Post cleaning
Cleaning Speed	10-200mm/sec

Vision Parameters

Parameter	Specification
CCD FOV	10*8mm
Camera type	130 Thousand CCD Digital camera
Camera System	Lock up/down optics structure
Camera Cycle time	300ms

Machine Parameters

Parameter	Specification
Power Source	AC: 220±10%, 50/60Hz 2.2KW
Air Pressure	4~6Kgf/cm²
Air Consumption	About 5L/min
Operating Temperature	-20℃~+45℃
Working environment humidity	30%~60%
Machine dimension (without Tower light)	1460(H)mm
Machine Length	1152(L)mm
Machine Width	1362(W)mm
Machine Weight Approx	Approx: About 900Kg
Equipment load bearing requirements	650Kg/m

Equipment Specifications

Equipment Model: YSL-GES

Size: 1152(L)*1362(W)*1460(H)mm

Main Power Supply: AC: 220 ± 10%, 50/60HZ 3KW stable power supply with rated current, plug type: British system

Main Gas Supply: Stable industrial gas source with pressure of 4.0-6kgf/cm², gas pipe diameter: 6mm/8mm/10mm/12mm

Machine Weight: Approximately 900Kg

Equipment Usage Environment Requirements

Workshop temperature: -20℃~+45℃
Workshop humidity: 30-60%
Static electricity protection: ESD grounding and static electricity protection required
Floor load-bearing capacity: Must be ≥ 650kg/m² (pay attention to floor sinking load-bearing capacity if not used on flat floor)

Tags: