|Liquid Tank:||17L||Pure Chemicals Tank:||32L|
|Dilute Chemicals Tank:||60L||Clean Time:||5~20min|
|Dry Time:||20~40min||Chemical Heat Temp:||0.5~0.7Mpa|
pcb cleaning equipment,
pcb washing machine
Durable Fully Pneumatic SMT Stencil Cleaners With 17L Liquid Tank
1. layers cleaning baskets: big 2 layers 645mm(L) ×560mm(W) × 200mm(H) x 2
2. Easy Chinese operation interface, quick and easy cleaning process parameters setting, procedures can be stored and called out; different password can be set
according to different management authorization.
3. Standard leaning chemicals can be add into machine manually or using dosing pump to add pure chemicals and DI water automatically according to different ratio(5%~20%).
4. Cleaning chemicals heat system, can heat to the suitable temperature, ,make cleaning efficient.
5. Cleaning process can be observed through window on machine.
6. Cleaning all kinds of flux and solder paste. v8. Real time electrical conductivity monitor system to monitoring cleaning result, can be set to 10~400us.
7. High standard cleanness, ion contamination is fully consistent with IPC-610D I level standard.
8. Cleaning chemicals repeated use in the machine, it can reduce 50% chemical cost.
9. Built-in resin pipe out filtration system to effective filtrate all kings of impurity substance like COD,BOD,PH…etc.
10. Total SUS304 stainless structure, Strong Acid and alkaline resistance, more than 10 years life span.
Contact Person: Eva Liu