|PCB Width:||Max 250mm||Flux Capacity:||Max 3.2L|
|Preheating Length:||800mm||Heating Zones:||2|
|Solder Volume:||220Kg||Conveyor Angle:||4-7°|
|Fulx Pressure:||3-5 Bar||Conveyor Speed:||0-1500 Mm/min|
pcb reflow oven,
reflow oven machine
Practical Lead-free wave soldering machine for making LED light
SMT lead free wave soldering machine for pcb /dual wave soldering manufacturer WS250
|Model No.||Yush N250|
|Number of heating zones||1|
|Length of heating zones||800mm|
|Preheating power||220V 5KW|
|Control method||Press key +PLC|
|Range of temp. control||Room temperature---300ºC|
|Preheating time||About 10-15mins for setting 150ºC|
|Solder type||Lead-free / Sn-Pb|
|Solder pot capacity||220KG|
|Solder pot temperature||300ºC|
|Solder power||380V 8KW|
|Solder temp. control method||PID&SSR|
|Wave crest drive power||500W 220V|
|Warm-up time of solder||About 120mins for setting 250ºC|
|Convey direction||L→R (R→L optional)|
|Convey angle||4-7 º|
|Flux pressure||3-5 bar|
1. Automatic conveying power system and auto synchronous board feeding functions.
2.Tin stove peak uses frequency conversing speed adjustment which can independently control the wave peak height.
3.Flux sprays system using scanning spray nozzle, Japanese nozzles and rodless pneumatic cylinders and PLC control, accurate and reliable.
4. PLC is used to control the machine, to ensure the reliability and stability of the system.
5.With Remote Infrared Ceramic heating pipe preheating device, heat radiation directly to the circuit board bottom, fast heating and stimulate the full activity of flux.
6.Special alloy transportation chain claws, non-stick tin and ensures the quality of welding PCB board.
7.Tin stove adopts imported high frequency conversion motor independent control, stable performance.
8. Lead-free solder furnace with independent design, environment protection and safety, easy to clean.
9. Preheating system uses three independent temperature control so that ensure the excellent heat preservation, temperature uniformity, temperature difference no more than ±2ºC.
10.Time can be controlled, we can preset switch functions, tin stove can heat within 90 minutes.
11.Reasonable design and sensitive fault security alarm system ensure the stable performance and operators’ safety.
1, our service tenet: fast, thoughtful and thorough
2, service goals: service quality to win the user satisfaction
3. the service efficiency: the warranty period or the warranty as equipment failure, the supplier in the receipt of the notification, the maintenance personnel in one hour to respone.
4, service principle: product wave soldering machine warranty period of 12 months, in the guarantee period the supplier will free maintenance and replacement of quality caused by the damaged wave soldering machine parts.
Contact Person: Eva Liu