|Laser Source:||All Solid-state UV Lasers With A Wavelength Of 355 Nm||All Solid-state UV Lasers With A Wavelength Of 355 Nm:||±20 μm|
|Ambient Temperature / Humidity:||20±2 ℃/＜60 %||Exercise System:||Full Closed Loop AC Linear Motor System|
|Laser Power:||10W Light (US Original Import)||Material Thickness:||≤1.0 Mm|
|Platform Positioning Accuracy:||±2 μm||Power:||AC220V / 3KW|
glue dispensing system,
glue dispensing equipment
Intelligent violet laser cutting machine - Ultraviolet laser cutting machine (Model:MicroScan1000P +)
● Efficient, fast FPC cutting, has been installed or not mounted PCB sub-board, drilling and covering
the window, fingerprint identification chip cutting, TF card sub-board, memory card sub-board,
mobile phone camera module cutting application.
● High degree of automation: galvanometer automatic correction, automatic focus, full automation,
the use of laser displacement sensor automatically adjust the focus to the height of the table to achieve fast alignment, saving time and effort.
● Block, delimit, specify block or select area cut and form directly, cut edge neat rounded, smooth
without burrs, no overflow glue. Products can be arranged in a matrix for multiple automatic
positioning cutting, especially for fine, difficult, complex patterns such as the appearance
● Can be array multi-block cutting, make full use of platform format, an array of cutting multiple
pieces of the same kind of processing products, saving up and down time to enhance the
efficiency of laser cutting.
● High-precision CCD automatic positioning, focusing, so that positioning fast and accurate,
time-saving peace of mind, high efficiency, fast delivery.
● High-performance lasers: the use of international brands of solid-state ultraviolet lasers, with
a good beam quality, focusing spot is small, uniform power distribution, thermal effect is small,
slit width is small, high cutting quality is the perfect cutting quality assurance.
● Fast and high precision: High precision, low drift galvanometer with fast linear motor system
platform combination, fast cutting while maintaining the micron level of high accuracy.
●Fully automatic positioning: the use of high-precision CCD automatic positioning, high precision,
without human intervention, simple operation, to achieve the same type of one-click mode,
greatly improving production efficiency.
●Exhaust gas treatment system: the suction system can eliminate all the cutting exhaust gas,
to avoid the harm to the operator and the pollution of the environment.
●Easy to learn software: independent research and development based on the Windows system
control software, easy to operate the Chinese interface, friendly and beautiful, powerful and
diverse, easy to operate.
|Power||AC220V / 3KW|
|Laser source||All solid-state UV lasers with a wavelength of 355 nm|
|Laser power||10W light (US original import)|
|Material thickness||≤1.0 mm|
|Machine precision||±20 μm|
|Platform positioning accuracy||±2 μm|
|Platform repeatability||±2 μm|
|Cut the format||440mm*380 mm|
|Focus spot diameter||20±5μm|
|Ambient temperature / humidity||20±2 ℃/＜60 %|
|Galvanometer system||CTI US original import|
|exercise system||Full Closed Loop AC Linear Motor System|
|Motion control system||PMAC(USA Delta Tau)|
|Necessary hardware and software||Includes PC and CAM software|
Contact Person: Eva Liu